Tuesday, September 10, 2013

i-GASATEK 6900 O2/CO2 Package Headspace Analyzer for MAP Packages

Oxygen and water vapor is the main factors influencing the product shelf-life. Some study found that, by controlling the composition ratio of the gas inside the packaging, products shelf-life can be extended or at least the quality of products can be improved. This has become the impetus of the rapid development and applications of barrier films. However, it is worth noting that the leak of gas filling inside the packaging (MAP and CAP packaging barely use oxygen to fill) will cause the increase in the proportion of oxygen. Furthermore, when filling in is completed, there will be a small amount of air remaining. Therefore the actual composition of the gas will be different from what expected. What would this problem cause? How to solve these problems? This article will analyze the relationship between the headspace gas analysis and the quality control of product packaging. The purchase tips of headspace gas analyzer will also be touched on.

Oxygen and carbon dioxide is the key point to headspace gas analysis.
Oxygen can not only damage the nutritional content of food (for example oxygen can oxidize oils and fats, it smells bad. Sometimes it is toxic). Under most circumstances, it is the conditions for the growth of bacteria (bacteria growth in food is the main reason for deterioration). But when the oxygen content is less than 2%, carbon dioxide levels in more than 7%, food and bacteria are in a state of hibernation, which can effectively extend the shelf life of food. Many drugs, such as low-cost iron salt, iodide, nitrite, unsaturated carbon chain and other types of organic drugs, can be slowly oxidized. Discoloration, smell, decomposition and deterioration will occur. Sometimes it is also toxic. Most of cosmetics contain fat ingredients. Non-saturated fat can easily cause oxidation and deterioration (rancidity), and oxygen is the most important external cause to rancidity.
Carbon dioxide gas is an important component to CAP packaging and MAP packaging. Its content is closely related to product shelf life length, and carbon dioxide content of the package is directly influencing carbonated drinks taste and quality. Drugs packaging also needs attention to the impact of carbon dioxide, because some drugs can combine with carbon dioxide in the air, resulting in deterioration. Examples are some hydroxide, oxide and the class of calcium drugs. They can absorb carbon dioxide and produce carbonate.
i-GASATEK 6900

Labthink i-GASATEK 6900 O2/CO2 Package Headspace Analyzer for MAP Packages can do the testing for the packages.

Technical Specification:
Test Gas:O<sub>2</sub> , CO<sub>2</sub>
O2 Test Range:0~100%
CO2 Test Range:0~100%                       
CO2 Test Accuracy:±2% 

Features:
1.Equipped with auto lifting stand which makes the whole testing process, including sample piercing and gas analyzing, completely automatic
2.The instrument can adjust test space according to the height of the sample to test
3.Multiple testing modes are available for the user
4.i-GASATEK 6900 Package Headspace Analyzer is designed with filtering function which prevents the powder content within specimen to block instrument
5.The sensors for O2 and CO2 are supplied by the world famous brand to ensure reliable overall product performance
6.i-GASATEK 6900 O2/CO2 Package Headspace Analyzer for MAP Packages is equipped with four USB ports and dual Internet ports for convenient data transmission.

Detailed information,pls contact Emily Wu at sales#labthinkinternational.com or Tel: (+1) 617-830-2190
Our website is:http://www.labthinkinternational.com/

Labthink International, Inc. is a global enterprise that provides professional quality control solutions for packaging materials and products. Our headquarters is based in Greater Boston, Massachusetts, well-known for being the hub of technological innovations. Our core businesses include the R&D of laboratory testing instruments, packaging testing and test data processing services. We are dedicated to providing integrated professional quality control solutions for packaging manufacturers, food and beverage producers, medical and pharmaceutical companies, and daily chemical and printing industries. Our Greater Boston headquarters combines functions of the North America sales division, the R&D center, the packaging testing laboratory, and the customer services center and administrations.

More information about i-GASATEK 6900 O2/CO2 Package Headspace Analyzer for MAP Packages,pls see
i-GASATEK 6900 Package Headspace Analyzer for MAP Packages

i-LEAKTEK 6600 Burst Testing of Flexible and Medical Package Seals

The breakage of flexible packages/pouches is one of the main factors influencing product packaging quality. Usually, breakage occurs in the following two situations: first, during filling process, the content would produce a heavy impact onto the bottoms of the pouches. If the bottoms can not withstand the impact, they would leak and hinder the filling efficiency as well as pollute the manufacturing environment. Second, during storage, if the pouches can not withstand the inner pressure increase caused by stack or other factors, they would also result in breakage and lead to content extinguishment and even pollution to the surrounding environment. How to solve the problem of breakage has been an obsession for the manufacturers. It’s usually believed that breakage has close relationship with heat-seal strength of the packaging materials, but such opinion is not completely correct.

i-LEAKTEK 6600 Burst Testing of Flexible and Medical Package Seals is for the expanding heat seal strength testing. Pressure should be increased inside the flexible package. The places with the worst strength can be found. Such places include, but are not limited to the heat seal places. Since expanding heat seal strength can not take the place of average heat seal strength, there is no relationship between expanding heat seal strength and stretching heat seal strength. Expanding heat seal strength relates to the size, shape and material of the pouches. If the material is so soft that it can be extended to several times its original length, obvious deformation would occur with the testing pressure increase. Therefore, slabs should be applied as the testing device to restrain the expansion caused by pressure increase and material deformation.
With the help of Labthink leak and seal strength tester, the maximum breaking force can be determined. Through pressure setting, the breaking time can also be determined.  The operator can design the stack structure according to testing data, and adjust the parameters of heat seal process so as to improve the packaging effects, or analyze the existing problems according to the breaking places on the flexible packages.

i-LEAKTEK 6600
Feature:
1.Positive pressure method and two testing modes including restrained inflation and unrestrained inflation
2.Standard test methods including Burst Test, Creep Test and Creep-to-Failure Test
3.Two test ranges are available with wide range of test pressure which can maximally be extended to 1.6 MPa and meet the requirements of different materials
4.Various accessories for package testing both qualitatively and quantitatively
5.Embedded computer control system provides safer and more reliable data management as well as test operation.
6.i-LEAKTEK 6600 Burst Testing of Flexible and Medical Package Seals  can be easily operated with a mouse, a keyboard, and a monitor, without requiring a PC.

Application:
i-LEAKTEK 6600 Burst Testing of Flexible and Medical Package Seals  can be used to measure the following materials:
1.Film Materials
2.Pilfer-proof Closures
3.Aerosol Vales
4.Flexible Tubes,etc

Test Standards;
i-LEAKTEK 6600
ASTM F1140, ASTM F2054, ISO 11607-1, ISO 11607-2, GB/T 10440-2008, GB 18454, GB 19741, GB 17447, GB/T 17876, GB/T 10004, BB/T 0025, QB/T 1871, YBB 00252005, YBB 00162002




Detailed information,pls contact Emily Wu at sales#labthinkinternational.com or Tel: (+1) 617-830-2190
Our website is:http://www.labthinkinternational.com/

Monday, September 9, 2013

i-THICKNESS 4100 Thickness Tester for Seal Packaging Pouches and MAP Packaging

i-THICKNESS 4100 Thickness Tester for Seal Packaging Pouches and MAP Packaging  is designed to measure the thickness of plastic film, sheet, diaphragm, paper, foils, silicon wafer, coatings and various materials precisely within the specified test range.
i-THICKNESS 4100 Seal Packaging Pouches and MAP Packaging Thickness Tester can be used with our advanced Online Data Management System for packaging testing, which comes with two versions to meet distinct needs of our clients:The Cloud Version & The Intranet Version
Features:

1.Mechanical contact measurement with an automatic presser foot
2.Standard contact area and various testing pressures to meet distinct requirements
3.Support both manual and automatic testing modes
4.The system institutionally displays the maximum, minimum, and average thickness as well as standard deviation for each test
5.Embedded computer control system provides safer and more reliable data management as well as test operation.
6.i-THICKNESS 4100 Seal Packaging Pouches and MAP Packaging Thickness Tester can be easily operated with a mouse, a keyboard, and a monitor, without requiring a PC.


i-THICKNESS 4100 Thickness Tester
Application:

i-THICKNESS 4100 Thickness Tester for Seal Packaging Pouches and MAP Packaging  is designed to test the following materials:
1.Films, Sheets, and Diaphragms
2.Paper and Paper Board
3.Foils and Silicon Wafers
4.Metal Sheets
5.Textiles
Technical Specification:

Test Range:0~2 mm (Standard)
0~6 mm,12 mm (Optional)
Resolution:0.1 μm
Test Pressure:17.5±1 KPa (Film); 50±1 KPa (Paper)

i-THICKNESS 4100 Thickness Tester for Seal Packaging Pouches and MAP Packaging conforms to the following standards:ASTM D374, ASTM D1777, ISO 4593, ISO 534, ISO 3034, GB/T 6672, GB/T 451.3, GB/T 6547, TAPPI T411, JIS K6250, JIS K6783, JIS Z1702, BS 3983, BS 4817

Labthink International, Inc. is a global enterprise that provides professional quality control solutions for packaging materials and products. Our headquarters is based in Greater Boston, Massachusetts, well-known for being the hub of technological innovations. Our core businesses include the R&D of laboratory testing instruments, packaging testing and test data processing services. We are dedicated to providing integrated professional quality control solutions for packaging manufacturers, food and beverage producers, medical and pharmaceutical companies, and daily chemical and printing industries. Our Greater Boston headquarters combines functions of the North America sales division, the R&D center, the packaging testing laboratory, and the customer services center and administrations.

Permeation Testing Equipment for Materials Barrier Property Test

With the outstanding performance in packaging and growing applications in more fields, high barrier property material has become one of the main trends in packaging material R&D worldwide. Correspondingly, the R&D and manufacturing of high barrier property materials have put forward higher requirements for testing instruments. It’s commonly believed, by operators, that data fluctuations of high barrier property materials would be greater than those of medium and low barrier property materials. What are the causes for such data fluctuations? What are the requirements for high barrier property material testing instruments? Based on the material characteristics displayed during high barrier property material transmission rate testing. The following machines is Labthink Permeation Testing Equipments for the materials barrier property test.


Permeation Testing Equipment for Materials  Barrier Property  Test
Permeation Testing Equipment for Materials  Barrier Property  Test  include Gas Permeability Tester,Water Permeability Tester and Air Permeability Tester.

Gas permeability Tester in packaging industry is a measure of the ability of a barrier material to allow gases (O2, N2 and CO2 etc.) to permeate through it in a specific time. It usually depends on the type of material, pressure, temperature and thickness of materials.

It has the following models:
i-GASTRA 7200 Gas Transmission Rate Tester
i-GASTRA 7200 Gas Transmission Rate Tester

i-GASTRA 7210 Gas Permeability Tester
i-GASTRA 7210 Gas Permeability Tester

i-ORGAMATE 7810 Organic Gas Permeability Analyzer
i-ORGAMATE 7810 Organic Gas Permeability Analyzer


i-GASMATE 7820 Mixed Gas Permeability Analyzer
i-GASMATE 7820 Mixed Gas Permeability Analyzer





Water vapor permeability  Tester  is a measure of the passage of water vapor through a membrane. It is the rate of water vapor transmission per unit area per unit of vapor pressure differential under test conditions.
It is also known as water vapor transmission rate (WVTR) or moisture vapor transmission rate (MVTR).
It has following models:
i-HYDRO 7300 Moisture Vapor Transmission Rate Tester
i-HYDRO 7300 Moisture Vapor Transmission Rate Tester

i-HYDRO 7310 Water Vapor Permeation Analyzer
i-HYDRO 7310 Water Vapor Permeation Analyzer


i-HYDRO 7400 Water Vapor Transmission Rate Tester
i-HYDRO 7400 Water Vapor Transmission Rate Tester


Air Permeability Tester is the resistance of fabrics (woven, knitted and non woven textile materials) to the passage of air under constant preset air pressure. Air permeability is an important property of some textile materials.

The air permeability is mainly dependent upon fabric's weight and construction (thickness and porosity).
It has following models:

i-OXTRA 7600 Oxygen Transmission Rate Tester
i-OXTRA 7600 Oxygen Transmission Rate Tester

i-OXTRA 7700 Oxygen Permeability Tester
i-OXTRA 7700 Oxygen Permeability Tester
Detailed information,pls contact Emilywu via sales@labthinkinternational.com or visit our website:http://www.labthinkinternational.com/.


Sunday, September 8, 2013

Permeation and Barrier Testing Instruments for Modified Atmosphere Packaging and Barrier Film

key Words:Permeation and Barrier Testing Instruments,Permeability Tester,Barrier Tester

Permeation and Barrier Testing Instruments for Modified Atmosphers Packaging and Barrier Film

Permeation and Barrier Testing Instruments for Modified Atmosphere Packaging and Barrier Film include Gas Permeability Tester,Water Permeability Tester and Air Permeability Tester.

Gas permeability Tester in packaging industry is a measure of the ability of a barrier material to allow gases (O2, N2 and CO2 etc.) to permeate through it in a specific time. It usually depends on the type of material, pressure, temperature and thickness of materials.

It has the following models:
i-GASTRA 7200 Gas Transmission Rate Tester
i-GASTRA 7200 Gas Transmission Rate Tester

i-GASTRA 7210 Gas Permeability Tester
i-GASTRA 7210 Gas Permeability Tester

i-ORGAMATE 7810 Organic Gas Permeability Analyzer
i-ORGAMATE 7810 Organic Gas Permeability Analyzer


i-GASMATE 7820 Mixed Gas Permeability Analyzer
i-GASMATE 7820 Mixed Gas Permeability Analyzer





Water vapor permeability  Tester  is a measure of the passage of water vapor through a membrane. It is the rate of water vapor transmission per unit area per unit of vapor pressure differential under test conditions.
It is also known as water vapor transmission rate (WVTR) or moisture vapor transmission rate (MVTR).
It has following models:
i-HYDRO 7300 Moisture Vapor Transmission Rate Tester
i-HYDRO 7300 Moisture Vapor Transmission Rate Tester

i-HYDRO 7310 Water Vapor Permeation Analyzer
i-HYDRO 7310 Water Vapor Permeation Analyzer


i-HYDRO 7400 Water Vapor Transmission Rate Tester
i-HYDRO 7400 Water Vapor Transmission Rate Tester


Air Permeability Tester is the resistance of fabrics (woven, knitted and non woven textile materials) to the passage of air under constant preset air pressure. Air permeability is an important property of some textile materials.

The air permeability is mainly dependent upon fabric's weight and construction (thickness and porosity).
It has following models:

i-OXTRA 7600 Oxygen Transmission Rate Tester
i-OXTRA 7600 Oxygen Transmission Rate Tester

i-OXTRA 7700 Oxygen Permeability Tester
i-OXTRA 7700 Oxygen Permeability Tester
Detailed information,pls contact Emilywu via sales@labthinkinternational.com or visit our website:http://www.labthinkinternational.com/.

Monday, September 2, 2013

i-GASTRA 7210 Manometric Method Gas Permeability Tester for Packages


i-GASTRA 7210 Manometric Method Gas Permeability Tester for Packages  is designed to determine the gas transmission rate, solubility coefficient, diffusion coefficient, and permeability coefficient of plastic material in the forms of films, composite films, high barrier materials, sheets, and aluminum foils under different temperatures.

i-GASTRA 7210 Manometric Method Gas Permeability Tester for Packages can be used with our advanced Online Data Management System for packaging testing, which comes with two versions to meet distinct needs of our clients: The Cloud Version &The Intranet Version
i-GASTRA 7210


Features:
1.Based on the differential pressure method and conforms to ASTM, ISO, GB and other international standards
2.Diffusion coefficient, solubility coefficient and permeability coefficient measurement
3.3 distinct or identical specimens can be tested simultaneously with individual test results
4.Test range is wide enough to meet the test requirements of extremely high- or low-barrier materials
5.Patented integrated design of three test cells improves the test efficiency and reduces the space occupancy of the instrument
6.Embedded computer control system provides safer and more reliable data management as well as test operation.
7.Statistics: easy calculation for historical results, instrument usage, energy consumption, and large statistical information

Test Specifications:
1.Test Range:0.05 ~ 50,000 cm3/ m2·24h·0.1MPa
2.Temperature Range 15 °C~55 °C
3.Accuracy ±0.1 °C
4.Vacuum Degree < 20 Pa
5.Vacuum Accuracy 0.1 Pa
i-GASTRA 7210 Manometric Method Gas Permeability Tester for Packages


i-GASTRA 7210 Manometric Method Gas Permeability Tester for Packages
conforms to the following standards:
ASTM D1434, ISO 2556, ISO 15105-1, GB/T 1038-2000, JIS K7126-1, YBB00082003

i-OXTRA 7700 Oxygen Permeability Testing for Contact Lens,Polyethylene and Plastics

i-OXTRA 7700  Oxygen Permeability Testing for Contact Lens,Polyethylene and Plastics is designed to determine the oxygen transmission rate of plastic films, composite films, sheets, high barrier materials, solar back sheets, aluminum foils, aluminized film, coextruded film and bottles, cans and boxes made of plastics, rubber, glass, paper and other metal materials.

i-OXTRA 7700  Oxygen Permeability Testing for Contact Lens,Polyethylene and Plastics can be used with our advanced Online Data Management System for packaging testing, which comes with two versions to meet distinct needs of our clients:The Cloud Version &The Intranet Version
i-OXTRA 7700

2.World leading pressure compensation technology ensures accurate and repeatable test results
3.Standard, proportional and continuous testing modes provide suitable test method for different materials
4.Patented integrated design of three test cells improves the test efficiency and reduces the space occupancy of the instrument.
5.3 distinct or identical specimens could be tested simultaneously with individual test results
6.Statistics: easy calculation for historical results, instrument usage, energy consumption, and large statistical information

i-OXTRA 7700  Oxygen Permeability Testing
Specification:                                      
Number of Specimens:3 pieces (with independent test results)
Extension 9 satellite bases:(1~30 specimen tests)
Specimen Thickness: ≤3 mm
Test Temperature:15°C~55 °C (Standard)
Accuracy:±0.1 °C  (Standard)

Test Principle:
i-OXTRA 7700  Oxygen Permeability Testing for Contact Lens,Polyethylene and Plastics conforms to the following standards:ASTM D3985, ASTM F2622, ASTM F1307, ASTM F1927, ISO 15105-2,GB /T19789, JIS K7126-2, YBB00082003


Detailed information,pls contact Emily Wu at sales#labthinkinternational.com or Tel: (+1) 617-830-2190
Our website is:http://www.labthinkinternational.com/

i-OXTRA 7600 OTR Testing Equipment for Tetra Pak

i-OXTRA 7600 OTR Testing Equipment for Tetra Pak is designed to measure the oxygen transmission rate of various films including plastic films, plastic composite films, paper-plastic composite films, coextruded films, aluminized films, aluminum foil, aluminum composite films, and many others.
                                                      
i-OXTRA 7600 OTR Testing Equipment for Tetra Pak can be used with our advanced Online Data Management System for packaging testing, which comes with two versions to meet distinct needs of our clients:The Cloud Version &The Intranet Version
                             
Features:
1. Designed for oxygen permeability test of various films,containers and contact lenses (Dk/t, Dk)
2.Testing three specimens at the same time in three test cells and providing average value of the three test specimens
3.Embedded computer control system provides safer and more reliable data management as well as test operation.
4.The instrument is equipped with four USB ports and dual Internet ports for convenient data transmission
5.Universal power input for easy access
6.User Management: multi-level account management for better data management and protection


Specification:
Accuracy:±0.1°C
Number of Specimens 1~3 pieces
Test Gas : Oxygen, air, high purity nitrogen with small amount of other gases (outside of supply scope)                                                                                                                       

i-OXTRA 7600 OTR Testing Equipment for Tetra Pak  conforms to the following standards:ASTM F2622, ASTM F1307, ASTM F1927, ASTM D3985, ISO 15105-2, GB /T19789, JIS K7126-2, YBB00082003


Detailed information,pls contact Emily Wu at sales#labthinkinternational.com or Tel: (+1) 617-830-2190
Our website is:http://www.labthinkinternational.com/

i-OXTRA 7600 Oxygen Transmission Rate Tester for Polyethylene ,Polymers,LDPE,PVC

i-OXTRA 7600 Oxygen Transmission Rate Tester for Polyethylene ,Polymers,LDPE,PVC  is designed to measure the oxygen transmission rate of various films including plastic films, plastic composite films, paper-plastic composite films, coextruded films, aluminized films, aluminum foil, aluminum composite films, and many others.  
                                                     
i-OXTRA 7600 Oxygen Transmission Rate Tester for Polyethylene ,Polymers,LDPE,PVC can be used with our advanced Online Data Management System for packaging testing, which comes with two versions to meet distinct needs of our clients:The Cloud Version &The Intranet Version
i-OXTRA 7600 Oxygen Transmission Rate Tester for Polyethylene ,Polymers,LDPE,PVC

                             

Features:

1. Designed for oxygen permeability test of various films,containers and contact lenses (Dk/t, Dk)
2.Testing three specimens at the same time in three test cells and providing average value of the three test specimens
3.Embedded computer control system provides safer and more reliable data management as well as test operation.
4.The instrument is equipped with four USB ports and dual Internet ports for convenient data transmission
5.Universal power input for easy access
6.User Management: multi-level account management for better data management and protection

Specification:
Accuracy:±0.1°C
Number of Specimens 1~3 pieces
Test Gas : Oxygen, air, high purity nitrogen with small amount of other gases (outside of supply scope)
i-OXTRA 7600 Oxygen Transmission Rate Tester for Polyethylene ,Polymers,LDPE,PVC

                                                                                                                       i-OXTRA 7600 Oxygen Transmission Rate Tester for Polyethylene ,Polymers,LDPE,PVC  conforms to the following standards:ASTM F2622, ASTM F1307, ASTM F1927, ASTM D3985, ISO 15105-2, GB /T19789, JIS K7126-2, YBB00082003

Detailed information,pls contact Emily Wu at sales#labthinkinternational.com or Tel: (+1) 617-830-2190
Our website is:http://www.labthinkinternational.com/



Permeation Testing Instruments Labthink

key Words:Permeation and Barrier Testing Instruments,Permeability Tester,Barrier Tester

Permeation Testing Instruments Labthink
Permeation Testing Instruments  include Gas Permeability Tester,Water Permeability Tester and Air Permeability Tester.

Gas permeability Tester in packaging industry is a measure of the ability of a barrier material to allow gases (O2, N2 and CO2 etc.) to permeate through it in a specific time. It usually depends on the type of material, pressure, temperature and thickness of materials.

It has the following models:
i-GASTRA 7200 Gas Transmission Rate Tester
i-GASTRA 7200 Gas Transmission Rate Tester

i-GASTRA 7210 Gas Permeability Tester
i-GASTRA 7210 Gas Permeability Tester

i-ORGAMATE 7810 Organic Gas Permeability Analyzer
i-ORGAMATE 7810 Organic Gas Permeability Analyzer


i-GASMATE 7820 Mixed Gas Permeability Analyzer
i-GASMATE 7820 Mixed Gas Permeability Analyzer





Water vapor permeability  Tester  is a measure of the passage of water vapor through a membrane. It is the rate of water vapor transmission per unit area per unit of vapor pressure differential under test conditions.
It is also known as water vapor transmission rate (WVTR) or moisture vapor transmission rate (MVTR).
It has following models:
i-HYDRO 7300 Moisture Vapor Transmission Rate Tester
i-HYDRO 7300 Moisture Vapor Transmission Rate Tester

i-HYDRO 7310 Water Vapor Permeation Analyzer
i-HYDRO 7310 Water Vapor Permeation Analyzer


i-HYDRO 7400 Water Vapor Transmission Rate Tester
i-HYDRO 7400 Water Vapor Transmission Rate Tester


Air Permeability Tester is the resistance of fabrics (woven, knitted and non woven textile materials) to the passage of air under constant preset air pressure. Air permeability is an important property of some textile materials.

The air permeability is mainly dependent upon fabric's weight and construction (thickness and porosity).
It has following models:

i-OXTRA 7600 Oxygen Transmission Rate Tester
i-OXTRA 7600 Oxygen Transmission Rate Tester

i-OXTRA 7700 Oxygen Permeability Tester
i-OXTRA 7700 Oxygen Permeability Tester
Detailed information,pls contact Emilywu via sales@labthinkinternational.com or visit our website:http://www.labthinkinternational.com/.